Назад

Каталог

Документация

Примеры использования

Цены

Запрос

www.rabbit.com

The RabbitLink facilitates high-speed remote or local programming and debugging of any Rabbit microprocessor-based system over most networks or the Internet. The RabbitLink card provides a connection between an Ethernet-based network and the standard programming connector on any Rabbit-based board. Static IP addresses can be set manually via the programming cable, or IP addresses can be assigned over Ethernet using DHCP.

Features

* Quickly download and debug any Rabbit-based board via Ethernet/Internet or direct connection

* Customize programs with supplied source code

* Easily set network address parameters

When added to a Rabbit-based system in the field, the RabbitLink provides an easy-to-use Ethernet interface for updating, programming, and debugging Dynamic C® programs over a local area network or the Internet. This allows the user to compile, run, and debug programs at a remote site from any Internet-connected PC running Dynamic C. All of the standard features of Dynamic C are available via the remote interface, including the STDIO window, watch expressions, and the ability to step through C and Assembly code.

RabbitLink network

Programming the RabbitLink

Shipped with software already installed, the RabbitLink can be used without modification. RabbitLink takes advantage of your PC's Ethernet port to facilitate high-speed local downloading and debugging. Using the programming cable provided in the RabbitLink Tool Kit, network parameters for RabbitLink are initially set up with just a PC running a terminal program such as Hyperterminal.

Tool Kit

The RabbitLink Tool Kit contains everything you need to use RabbitLink: a 9 V AC adapter, serial cable for programming and debugging, CD-ROM containing RabbitLink source code, user's manual, and plastic enclosure. (International orders do not include AC adapter unless specifically requested.)