Rabbit-based applications now have even more ways to communicate. Rabbit Semiconductor has added Bluetooth® support for selected core modules, the BL2500 and the BL2600 single board computers. Based on the EmbeddedBlue™ eb506 AHC IN Bluetooth Radio Module from A7 Engineering.

RabbitLink facilitates remote programming and debugging of any Rabbit microprocessor-based system. It also provides a portal to the Internet for most embedded systems with a serial port, serving web pages and sending E-mail.

Designed to significantly increase the data-storage capabilities of embedded control systems powered by our single-board computers (SBCs). Models offer 16, 8, or 4 megabytes of memory.

This converter allows Rabbit-based systems to be programmed via the USB (universal serial bus) port rather than directly from a serial port. This is necessary if your laptop or computer lacks a serial port. (Note: you will still need the serial programming cable.) This converter has been verified for operation with Dynamic C and the USB-compatible Windows operating systems: 98, 2000, XP, and ME.

Serial interface cable with a DB9 on one end and a 10 pin flat ribbon connector on the other. Connects Rabbit Semiconductor prototyping boards to a PC serial port. For use with all RCM prototyping boards.

2mm connector for Rabbit 2000-based products, RCM3000/RCM3100, LP3500.

1.27 mm connector for all Rabbit 3000-based and Rabbit 4000-based products (except RCM3000/3100, LP3500).

Ideal for copying compiled software programs from one Rabbit-based product to another and for use in a production environment.

Use these adapter boards to provide a connection from RabbitCore modules and select single-board computers to a prototyping/development board that has a prototyping area with 0.1" pitch.

Connector Adapter Boards provide a connection from RabbitCore modules and select single-board computers to a prototyping/development board that has a prototyping area with a 0.1" pitch. One Adapter Board is designed for Rabbit-2000 based RabbitCores and the Jackrabbit SBC with 2 mm headers, and the other Adapter Board is designed for Rabbit 3000-based RabbitCores with either 2 mm or 1.27 pitch headers (RCM3000, RCM3100, RCM3200 and RCM3300). The Adapter Boards are sold individually (bagged with an assortment of connectors) or in panels of five.

Helps application development by providing the accessories needed to interface to a 10Base-T network. Includes an Ethernet hub, two Ethernet straight-thru cables, and one Ethernet cross-over cable.

This kit is intended to help in application development by providing the accessories needed to interface to a 10Base-T network. Includes an Ethernet hub, two Ethernet straight-thru cables, and one Ethernet cross-over cable.

The hub includes the four 10Base-T ports, a slim metal case, and built-in LED indicators. The Ethernet ports provide effective information exchange, resource sharing, and a client/server or peer-to-peer solution using simple UTP (unshielded twisted pair) wiring.

Once powered on, the Ethernet hub is operational—with no configuration required—and is ideal for desktop development.